Chia sẻ:

210MA-E, 210MB-E máy phay 8-16 trục dạng truyền thông

Sản phẩm đa trục chính và hiệu suất cao

-Được trang bị bo mạch chính hiệu suất cao.

-Hỗ trợ giao tiếp truyền thông Yaskawa Mechatrolink-lll.

-Hỗ trợ giao tiếp truyền thông Ethercat & RTEX.

Kiểm soát đường viền chính xác cao (HPCC)

Chức năng HPCC điều chỉnh các khối không liên tục thành một đường cong trơn tru. Điều này sẽ nâng cao độ chính xác gia công và giảm sốc cơ học.

Category Items Composite Milling
210MA-H 210MB-H 210MA-E 210MB-E 220MA 220MB
Product Specification Max. PLC Controlled Paths 4 4
Max. PLC Controlled Paths 3 3
Standard Axis 8 12 8 12 8 12
Max. Axis (Optional) 9 16 9 16 9 16
Max. Spindle 6 6
Max. Simultaneous Axis Control 4 4 4 4
Min. Control (mm) 0,0001 0,0001 0,0001 0,0001
Max. number of program coordinate 100 100
Max. Number of Table Tools 96 96
Multi-Channel Function Group 4 4
Look-Ahead Blocks no. 2000 2000
Block Processing timT 3000 3000
Hardware Specifications Storage DISKA (MB) 4096 4096
Standard I/O 32/32 32/32 32/32 32/32
Optional I/O 96/96 96/96 96/96 128/128
DA 2 2 2
Monitor (Inch) 10,4 8 10,4 10.4/15
CF Card
CF Card 2 2
USB 2 2
RJ-45 1 2
VGA Output 1***
PS/2
RS-232
RS-422
RS-485 1 1
USB 2
SRI 1 1
Servo Control Pulse Train (A/B Phase)
Pulse Train (CW/CCW)
Mechatrolink II O
Mechatrolink III O O
EtherCAT O O
RTEX O O
Compensation Backlash Compensation O O
Pitch Error Compensation O O
Angular Error Compensation O O
Temperature Error Compensation O O
2 Dimension Error Compensation O O
Operation MPG Simulation O O
Dry Run O O
Optional Stop O O
Single Block O O
Virtual MPG O O
Restart at Feedhold O O
Restart at Break Point O O
Tool Return O O
Fixture Offsets O O
MPG Offsets O O
Programming Optional Skip O O
B-Stop O O
Absolute Zero Point Coordinate (G92/G92.1) O O
Interrupt Macro (M96/M97) O O
M198 call Subroutines O O
Expandable G Code O O
HSHP Constant Jerk Control O O
Multiblocks S-curve motion plan O O
Auto declaration in Corner O O
Speed Limit for Round Radius O O
Multiple Sets of HSHP Parameters O O
Quick Parameter Setup O O
SPA Feature O O
Virtual Radius Funciton (for Rotary Axis) O O
HSHP Control Mode I (G05.1 Q1) O O
HSHP Control Mode II (G05P10000) O O
NURBS Interpolation Ability O O
Tool
Management
Auto Tool Setting O O
Auto Tool Management O O
Tool Life Management O O
Accessibility Machine Lock (R bit) O O
Software Limit O O
Spindle Speed Arrival Check O O
Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Dynamic Axis Synchronize Feature O O
Rapid Retraction for Rigid Tapping O O
Virtual Axis Feature O O
Axis Change Feature O O
Axial Torque Limit O O
Serial Bus Setting Feature(CNC Axis) O O
Driver Information Display(CNC Axis) O O
Spindle Application Feature(CNC Axis) O O
Serial Bus PLC Axis O O
ROT Element O O
Dipole Front and Back System O O
Data Backup Recovery O O
Customized Opening Screen O O
My Favorites (Only Eight key system supports) O O
Project Protection Feature O O
Limit Access Manager O O
Remote AP Monitor O O
Edit Background Edit O O
Edit Protection O O
Immediate Grammar Check O O
PLC PLC Diagnosis Feature(FORCE I Point) O O
Data Transfer NETWORK O O
FTP O O
RS-485 O O
DNC(Network) O O
DNC(USB) O O
Information Display Operation CV Display O O
Graphic Simulation O O
Partial Graphic Simulation O O
Dynamic Multi-Language Switch O O
Inclined Plane Feature Coordinate(Inclined Plane Process G68.2, G68.3) Δ Δ
Feature Coordinate Teach Δ Δ
5 axis feature 5 Axis RTCP (G43.4)
Smooth TCP
G code command High Precision Locus Control Mode (G05P10000) O O
Smoothing Path Mode (G05.1) O O
NURBS Interpolation (G06.2) O O
Thread Cutting (G33) O O
Auto Tool Measurement (G37) O O
Tool of Offsets (G45~G48) O O
High Speed Peck Drilling Cycle (G73) O O
Left Handed Tapping (G74) O O
High Precision Boring Cycle (G76) O O
Drilling cycling (G81) O O
Chopping (G81.1) O O
Bottom Feed Hold Drilling Cycle (G82) O O
Peck Drilling Cycle (G83) O O
Tapping Cycle (G84) O O
Boring Cycle (G85) O O
High Speed Boring Cycle (G86) O O
Back Boring Cycle (G87) O O
Semi Automatic Finishing Boring Cycle (G88) O O
Bottom Feed Hold Boring Cycle (G89) O O
Multi-Group HSHP Parameter (G120.1) O O
Option Option-4 Enable Plugin Function O O
Option-11 High Precision Contour Control (HPCC) O Δ Δ O
Option-12 Rotation Tool Center Point (RTCP) Δ Δ
Option-13 Feature Coordinate System Δ Δ Δ Δ
Option-14 Parameter learning function
Option-15 Tapping Learning
Option-16Syntec Vision Δ Δ Δ Δ
Option-17 Commercial Vision Software Δ Δ Δ Δ
Option-18 CAD/CAM Δ Δ Δ Δ
Option-19 3D Arc Interpolation Δ Δ
Option-20 Pick and Place (All in one) Δ Δ
Option-21 Four Axis Robot
Option-22 Five Axis Robot
Option-23 Six Axis Robot
Option-24 Gantry Robot Δ Δ
Option-25 Advanced Look-Ahead
Option-26 Smooth Tool Center Point(STCP)
Option-27 Multiple mechanisms for five-axis
Option-28 The 2nd coordinate supports feature coordinate system
Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
Option-31 High Speed Chamfering Contour Control
Option-32 ROT Servo Turret
Option-34 Wood Software
Option-35 3D Laser Scanning
Option-36 Wood Built-In CAM Function

* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half

O Standard function
△ Optional function
– Not available function

Thông tin liên hệ