Thông số kỹ thuật
| Line item | Automation controller with touch screen (Pulse) | ||||
| Model | HC-8A / HC-10A / HC-15A | HC-8S | |||
| -K | -S | -S | -E | ||
| Number of axes | Standard | 3-4 | 5 | ||
| Option | – | – | |||
| Maximum simultaneous number | 4 | 5 | |||
| Axis group | Main system axis group | 4 | 4 | ||
| Main system + PLC axis group | 4 | 4 | |||
| MST channel | 4 | 4 | |||
| Spindle number | 6 | 6 | |||
| Hardware | Servo Control | Pulse | Step | ||
| RAM | 256MB | 256MB | |||
| I / O standard | 32/32 | 16/4 | |||
| RIO option | – | – | |||
| DA | 2 | – | |||
| Screen | With function keys | Full plane | Full plane | Second half | |
| 8 “/ 10” / 15 “touch panel | 8 “touch panel | – | |||
| DiskC | Flash 256MB | Flash 256MB | |||
| DiskA | Flash 4GB | Flash 256MB | |||
| Front interface | USB | 1 | 0 | 0 | |
| Rear interface | RJ-45 | 1 | 2 | ||
| SRI | 0 | 2 | |||
| RS-485 | 1 | 1 | |||
| USB | 0 | 2 | 2 | ||
| KB | 1 | 0 | |||
| H / K | 1 | 0 | |||
| 5V output | 1 | 0 | |||
| VGA | – | – | |||
| System | WinCE | WinCE | |||
| Standard function | 1. Support G / M code
2. Support eHMI custom 3. Does not support tool-related functions 4. Spindle support |
1. Support G / M code
2. Support eHMI customization 3. Support five-axis linkage 4. Not support tool-related functions 5. Support spindle |
|||
| Optional function | 1. Vision
2. Remote monitoring |
1. Vision
2. Remote monitoring |
|||
| Accessory hardware | – | – | |||
| Option-4 | Enable Plugin Function | O | O | ||
| Option-5 | Enable PC-CNC Application | O | O | ||
| Option-11 | High Precision Contouring Control Mode | Δ | Δ | ||
| Option-12 | Rotation Tool Center Point Control (RTCP) | Δ | Δ | ||
| Option-13 | Feature Coordinate System | Δ | Δ | ||
| Option-14 | Parameter learning function | ||||
| Option-15 | Tapping Learning | ||||
| Option-16 | Syntec Vision | Δ | Δ | ||
| Option-17 | Commercial Vision Software | Δ | Δ | ||
| Option-18 | CAD / CAM function CAD / CAM | Δ | Δ | ||
| Option-19 | 3D Arc Interpolation | Δ | Δ | ||
| Option-20 | All in one Pick and Place (All in one) | ||||
| Option-21 | Four Axis Robot | Δ | Δ | ||
| Option-22 | Five-Axis Robot | Δ | Δ | ||
| Option-23 | Six-Axis Robot | Δ | Δ | ||
| Option-24 | Gantry Robot | Δ | Δ | ||
| Option-25 | High-speed pre-resolving function Advanced Look-Ahead | Δ | Δ | ||
| Option-26 | Smooth Tool Center Point Control (STCP) | ||||
| Option-27 | Multiple mechanisms for five-axis | ||||
| Option-28 | The 2nd coordinate supports five-axis function | ||||
| Option-29 | Four-axis Rotation Tool Center Point Control (4AXRTCP) | Δ | Δ | ||
| Option-30 | Five-axis Synchronized Motion Control | ||||
| Option-31 | High Speed Chamfering Contour Control | ||||
| Option-32 | ROT Servo Turret | ||||
| Option-34 | Wood Software | ||||
| Option-35 | 3D Laser Scanning | ||||
| Option-36 | Wood Built-In CAM Function | ||||
| Option-37 | Wood Build-In CAM Function | ||||
| Option-38 | Right-angle multi-arm function Multi-Gantry Robot | ||||
| Option-39 | 2D simultaneous marking | ||||
| Option-40 | Expand the number of T codes to the maximum limit | ||||
O Standard function
△ Optional function
– Not available function
Chúng tôi là nhà sản xuất bộ điều khiển CNC và robot công nghiệp chuyên nghiệp. Chúng tôi từ lâu đã tham gia nghiên cứu và phát triển công nghệ phần mềm và phần cứng cho các bộ điều khiển máy công cụ.
Copyright © 1995 – 2023 Syntec Vietnam. All rights reserved
