Economical welding controller
-Industrial construction, higher stability and anti-interference than motion control boards.-Supports commercially available general servo and step motors.-Supports up to four-axis simultaneous motion and differential compensation.
Laser welding controller
-Based on the foundation of machine tool motion control, it provides stable multi-axis motion control capabilities.-Not only provides motion control, but also combines motion and welding process to provide dedicated control solutions for welding process.-Aiming at the application habits of the welding industry, packaging the special HMI for provides a good operating experience, and the intuitive operation reduces the using threshold.
Low using threshold
-Built-in laser welding processes such as time power curve, speed power curve, etc., no need other development can provide laser welding process.-Conversational teaching interface design, you can complete welding program editing without learning any code.-The controller integrates motion control, laser source control, HMI, PLC.
Highly integrated laser source
-Can connected to all commercially available laser sources, provide standard interface, plug and play without secondary development.-Support laser source status monitoring, monitor laser source status and alarms through the controller.-Provide laser source encryption and decryption function, machine maker can perform remote encryption of laser source through the controller.
○ Standard－ Not Support△ Optional
|
Product specifications |
|||||||||
| Model | FC 16I | FC 16O | FC 32I | FC 32O | FC SLSR AD | FC SLSR DA | FC SLSR PWM | FC-B | FC-C |
| Number of input signal channels | 16 ch | 32 ch | – | N/A | |||||
| Input resistance | 2.2KΩ | – | 2.2KΩ | – | N/A | ||||
| Input circuit isolation | Optocoupler isolation | – | Optocoupler isolation | – | N/A | ||||
| Input action display | When the optocoupler is driven, the input point indicator light is on. | – | When the optocoupler is driven, the input point indicator light is on | – | N/A | ||||
| Input signal connector size | 18-pin 5.0mm pitch European standard terminal | 20-pin 2.54mm pitch horn connector × 2 | – | N/A | |||||
| Voltage specification | – | 24VDC below | – | 24VDC
below |
– | N/A | |||
| Maximum Load – Resistive | – | 2A/1 point (8A/COM） | – | 625mA/1 point | – | N/A | |||
| Maximum Load – Inductive | – | 12W (24VDC) | – | N/A | |||||
| Quantity | – | 8 | 4 | 1 | N/A | ||||
| Input/output signal type | – | Differential/single-ended (optional) | single ended | differential | N/A | ||||
| Signal type | – | AD+ AD- AGND | DA AGND | D+ D- | N/A | ||||
| Input point type | digital input | Transistor-T | digital input | Transistor-T, isolated | – | N/A | |||
| circuit power | – | ±10V 12bits | 5V | N/A | |||||
| Number of leg positions | – | 16+2(AGND) | 4(DA) 2(AGND) | 2 | N/A | ||||
| Input signal specifications | 24V(Sink/Source) | 24V 1.9A(8A total) | 24V(Sink/Source) | – | N/A | ||||
| Input Current | 24VDC 5mA | – | 24VDC 5mA | – | N/A | ||||
| Action level OFF->ON | >15VDC | – | >15VDC | – | N/A | ||||
| Action level ON->OFF | <5VDC | – | <5VDC | – | N/A | ||||
| Reaction time OFF->ON | 10ms±10% | – | 10ms±10% | – | N/A | ||||
| Reaction time ON->OFF | 15ms±10% | – | 15ms±10% | – | N/A | ||||
| Maximum input frequency | 2.5KHz | – | 2.5KHz | – | N/A | ||||
We are a professional CNC controller and industrial robot manufacturer. We have been long engaged in the research and development of software and hardware technology for machine tool controllers.
Copyright © 1995 – 2023 Syntec Vietnam. All rights reserved
