Multi Axis Group Mill Turn Archives

Category	Items	Multi Axis Group Mill Turn
		11TB	200TB-5	210TB-H	210TB-H5	220TB	220TB-5
Product specification	Max. Axes group in system	2	4	4		4
	Max. PLC axes group	1	3	3		3
	Standard controlled axes (standard)	8	12	12	12	12	12
	Max. controlled axes (option)	8	16	16	16	16	16
	Max. Number of spindles	6	6	6		6
	Max. Axes in synchronous control (single axes group)	4	5	4	5	4	5
	Min. Control unit-mm	0,0001	0,0001	0,0001		0,0001
	Max. Number of work coordinates system	100	100	100		100
	Max. Groups of tool compensation	96	96	96		96
	Number of multi-channel function groups	4	4	4		4
	Number of pre-read segments	1000	2000	2000		2000
	Segment process time	1000	4000	1000	4000	1000	4000
Hardware specification	Storage DISKA (MB)	512	256	4096		4096
	I/O standard	64/64	32/32	32/32		32/32
	I/O optional	128/128	96/96	96/96		128/128
	DA	2	2	2		2
	Display (Inch)	10,4	8/10.4	8/10.4/rear half***		10.4/15
	CF card	—	—	—		—
	USB	2	1	2		2
	RJ-45	1	2	1		2
	VGA output	—	1	1***		—
	PS/2	—	1	—		—
	RS-232	—	1	—		—
	RS-422	—	1	—		—
	RS-485	1	—	1		1
	USB	—	2	—		2
	SRI	—	—	1		1
Servo control	General purpose (A/B phase)	O	—	—		—
	General purpose (CW/CCW)	O	—	—		—
	Mechatrolink II	—	O	O		O
	Mechatrolink III	—	—	O		O
	EtherCAT	—	—	O		O
	RTEX	—	—	O		O
Compensation	Back gap compensation	O	O	O		O
	Pitch error compensation	O	O	O		O
	Spike compensation	O	O	O		O
	Temp. Rise compensation	O	O	O		O
	2D compensation	O	O	O		O
Operation	Handwheel simulation	O	O	O		O
	Program empty run	O	O	O		O
	Selective stop	O	O	O		O
	Segment execution	O	O	O		O
	Virtual handwheel	O	O	O		O
	Pause point start	O	O	O		O
	Tool interrupt point start	O	O	O		O
	Tool retract	—	—	—		—
	Offset setting	O	O	O		O
	Handwheel offset function	—	—	—		—
Program input	Selective jump	O	O	O		O
	B-STOP/ program end	O	O	O		O
	Absolute zero coordinates system (G92/G92.1)	O	O	O		O
	Interrupt MACRO (M96/M97)	O	O	O		O
	M 198 call subroutine	O	O	O		O
	G-code extension	O	O	O		O
High speed high precision	Constant Jerk control	O	O	O		O
	Cross-segment S-curve acceleration/ deceleration	O	O	O		O
	Auto deceleration at corner	O	O	O		O
	Corner radius speed limit	O	O	O		O
	Multiple high speed high precision parameter set	—	—	—		—
	User quick parameter	—	—	—		—
	SPA function	—	—	—		—
	Virtual circle radius function	O	O	O		O
	High speed high precision control mode I (G05.1Q1)	—	—	—		—
	High speed high precision control mode ii (G05P10000)	—	—	—		—
	NURBS interpolation function	—	—	—		—
Tool management	Auto tool align screen	—	—	—		—
	Auto work measurement	O	O	O		O
	Tool lifespan management	O	O	O		O
Auxiliary function	Mechanical lock (R-Bit)	O	O	O		O
	Software travel limit	O	O	O		O
	Spindle speed detection	O	O	O		O
	Axial coupling function	O	O	O		O
	Axial dynamic coupling function	O	O	O		O
	Feedback coupling function	O	O	O		O
	Threading quick tool retract	O	O	O		O
	Virtual axis function	O	O	O		O
	Axle exchange function	O	O	O		O
	Axial torque control	—	O	O		O
	Serial adjustment function (CNC axis)	—	O	O		O
	Driver data display (CNC axis)	—	O	O		O
	Spindle adaptation function (CNC axis)	—	O	O		O
	Serial PLC axis	—	O	O		O
	High speed spindle positioning (SYNTEC spindle required)	—	O	O		O
	ROT element	—	O	O		O
	Dipole foreground/ background configuration	O	O	O		O
	Data backup and recover	O	O	O		O
	Start-up screen customization	O	O	O		O
	My favorite (Only support ARM 8-key system)	O	—	O		O
	Project protection function	O	O	O		O
	Access management	O	O	O		O
	Remote AP monitoring	O	O	O		O
Programming	Background edit	O	O	O		O
	Edit protection	O	O	O		O
	Real time syntax check of processing program	O	O	O		O
PLC	PLC diagnosis function (FORCE I- point)	O	O	O		O
Data transfer function	NETWORK	O	O	O		O
	FTP	O	O	O		O
	RS-485	O	O	O		O
	DNC(Network)	O	O	O		O
	DNC(USB)	O	O	O		O
Data display	Operation history display	O	O	O		O
	Graphic simulation	O	O	O		O
	Partial graphic simulation	O	O	O		O
	Dynamic multi-language switch- over	O	O	O		O
G-code	Oval cutting (clockwise) (G02.1)	O	O	O		O
	Parabolic cutting (clockwise) (G02.2)	O	O	O		O
	Cylinder interpolation (G07.1)	O	O	O		O
	Start-up polar coordinates (G12.1)	O	O	O		O
	OD/ID turning cycle (G20)	O	O	O		O
	Threading cycle (G21)	O	O	O		O
	Intermediate threading feed cycle (G21.2)	O	O	O		O
	End face turning cycle (G24)	O	O	O		O
	Jump function (G31)	O	O	O		O
	Treading (G33)	O	O	O		O
	Variable pitch threading (G34)	O	O	O		O
	Polygon turning (G51.2)	O	O	O		O
	Work coordinates system setting (G54~G59.9)	O	O	O		O
	Mirror function (lathe) (G68)	O	O	O		O
	Complex turning cycle (G72~G78)	O	O	O		O
	Fixing cycle for drilling (G80, G83~G89)	O	O	O		O
	Absolute zero coordinates system preset (G92.1)	O	O	O		O
	Inverse time feed (G93)	—	—	—		—
	Constant surface cutting speed (G96)	O	O	O		O
	Spindle synchronization function (G114.1)	O	O	O		O
	Spindle load function (G114.3)	O	O	O		O
Option	Option-4 Enable Plugin Function	O	O	O		O
	Option-11 High Precision Contour Control (HPCC)
	Option-12 Rotation Tool Center Point (RTCP)		Δ		Δ		Δ
	Option-13 Feature Coordinate System		Δ		Δ		Δ
	Option-14 Parameter learning function
	Option-15 Tapping Learning
	Option-16Syntec Vision
	Option-17 Commercial Vision Software
	Option-18 CAD/CAM
	Option-19 3D Arc Interpolation
	Option-20 Pick and Place (All in one)		Δ	Δ		Δ
	Option-21 Four Axis Robot
	Option-22 Five Axis Robot
	Option-23 Six Axis Robot
	Option-24 Gantry Robot	Δ
	Option-25 Advanced Look-Ahead
	Option-26 Smooth Tool Center Point(STCP)
	Option-27 Multiple mechanisms for five-axis
	Option-28 The 2nd coordinate supports feature coordinate system
	Option-29 Four-axis Rotation Tool Center Point Control (4AXRTCP)
	Option-31 High Speed Chamfering Contour Control
	Option-32 ROT Servo Turret		Δ	Δ		Δ
	Option-34 Wood Software
	Option-35 3D Laser Scanning
	Option-36 Wood Built-In CAM Function

* Only sell in Mainland China
** Only sell in Taiwan
*** VGA is only provided in the rear half

O Standard function
△ Optional function
– Not available function

Category

220TB, 220TB-5 lathe machine 12-16 axis serial

200TB-5 lathe machine 12-16 axis serial M2

210TB-H, 210TB-H5 lathe machine 12-16 axis serial

11TB lathe machine 8 axis pulse